Water Level Controller

This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. Its has the following unique feature:

1) When tank is in reserve mode or empty it automatically starts the motors if water is present in the pipeline.
2) If water is present in the line it indicates the presence on the panel.
3) It indicates water reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.
4) It different colored indications of water or oil in tank.
5) Bypass switch to start motor: suppose you do not want to use the water from the storage tank and want fresh water for bath but the tank is full, in that case if the system is in automatic mode it will allow the motor to run; in that case you can use the bypass switch. Note: During bypass mode the system will give you continuos audible signal to alert you that after fulfilling your purpose, please put the system in automatic mode by switching off the bypass switch.

At large our systems not only help you but your neighbors and society also as it reduces the wastage of water by cutting down any further overflow than what you need.